MEMS_Diag 4.5
Paid Version
Publisher Description
MEMS_Diag - Rover MEMS 1.3 / 1.6 /1.9 ECU diagnostics software
IMPORTANT UPDATE: In case of app crashing on startup, please make sure that GPS location services are enabled (not in power saving mode) BEFORE starting the app. Apparently, there have been some location API changes in newer devices and/or Android OS (10 ?).
MEMS_Diag is an application designed to communicate with pre-OBD Rover engine management systems (ECU).
Modular Engine Management System (MEMS) was used on many cars in the 1990s built by the Rover group (models equipped with K-Series petrol engine)
Currently only MEMS 1.6 and 1.9 (1.3 added as a test) are supported, later versions are OBD2 compliant so they're not in the scope of this project
Implemented features:
- Realtime engine parameters (rpm, map, ignition advance, coolant temp, inlet temp, oxygen sensor, fuel trim/correction and more...)
- Retrieve and erase error codes
- DataGrid view (numerical/table display)
- GraphView (selectable parameters, multiple series)
- Data logging, csv format (available in full version only)
- Adaptations (rpm idle, ignition offset, idle fueling trim)
- Virtual calculations (MAF g/s, Fuel Consumption)
- GPS logging
In order to use this software, the following components are required:
- Android device (smartphone), minimum OS version 3.1+ (USB host access)
- USB port
- the so-called "USB OTG" cable
In addition to the above, depending on the MEMS version, you also need:
for MEMS 1.9:
for MEMS 1.3/1.6:
- Any USB-to-TTL converter, again, the most popular are FTDI FT232 and PL2303. Remember that MEMS 1.6 uses 5V logic (depending on the quality of the converter circuit a 3.3 V may also work)
So far the following ECU have been verified to work correctly:
MKC103610 (MEMS 1.6)
MKC101610 (MEMS 1.6)
MKC104393 (MEMS 1.9, LandRover Freelander 1.8 Petrol 99')
Please try the "lite" version before purchasing the full edition. This is important to verify that your hardware interface is compatible.
https://play.google.com/store/apps/details?id=com.rovermemslite&hl=en
For more details, please visit http://memsdiag.blogspot.com
About MEMS_Diag
MEMS_Diag is a paid app for Android published in the Telephony list of apps, part of Communications.
The company that develops MEMS_Diag is pwoz. The latest version released by its developer is 4.5. This app was rated by 11 users of our site and has an average rating of 3.6.
To install MEMS_Diag on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2015-11-01 and was downloaded 338 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the MEMS_Diag as malware as malware if the download link to com.rovermemsfull is broken.
How to install MEMS_Diag on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the MEMS_Diag is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by MEMS_Diag will be shown. Click on Accept to continue the process.
- MEMS_Diag will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
